SZL series vertical dual drums chain grate water pipe steam and hot water boiler, adopts quick fitting and assembly structure. The 4-6t/h boiler is of quick fitting pipe structure, exit shop after completely assembled, the boiler of 6-35t/h is composed of 2 main components. The upper assembled components is the body heat accepting part, and the lower assembled component is of combustion equipment. The former part of the boiler body is arranged an water cooling wall, the upper part of it is connected to boiler cylinder, and its lower part is connected to collective chest, so as to form a combustion room and absorb the radiated heat from the furnace. Its rear part is arranged with dense convection pipes between upper and lower boiler cylinders. The high temperature smog after combustion shall stand for twice returning flushing transversely to the heat accepting surfaces, and shall be introduced to coal saver singly arranged, and flow into duster and exhausted from chimney in the end.
|Rated thermal power（MW）||4.2||5.6||7.0||14||21|
|Rated working pressure（MPa）||1.0||1.0/ 1.25||1.0/ 1.25||1.0/ 1.25||1.0/ 1.25|
|Rated output water temperature（℃）||115||115/130||115/130||115/130||115/130|
|Return water temperature（℃）||70||70||70||70||70|
|Effective area of great（㎡）||7.62||10.5||11.8||20.8||28.1|
|Low heating value（KJ/kg）||21000|
|Weight of biggest part for transportation（t）||21||25||28||30||31|
|Overall dimension of boiler assembled LxWxH(m)||7.0x2.7x3.5||6.9x3.2x5.3||7.9x3.3x3.5||11.0x3.2x3.5||9.9x3.3x3.6|
Notice: As the company's products continue to improve parameters of the above products will be continuously updated page listed for reference only.
CNC manufacturing technology
The key processing technologies such as steel plate blanking, circling, drilling of drum and pipe plate are all adopt advanced CNC processing to reduce the assembly stress and prolong the service life of the boiler.
Steel pipe cutting, thread pipe pressing and convection pipe processing adopt advanced CNC process.
Automatic production line.
Advanced welding process
The welding of important parts like the vertical and circular seams of the boiler, the pipes, the inside of boiler and the flange are all adopted automated welding processes such as submerged arc welding or gas shielded welding to ensure the welding quality. All the vertical and circular seams will be done 100% radiographic inspection.
Tube flange weld adopts robot welding.
The chain grate panel, front and rear smoke chamber panel adopts CNC plasma cutting machine to cut orderly and beautifully.
Unique structural design
According to different capacity, different numbers of independent wind bins are set from front to back of the grate.
The user can reasonably distribute the air according to different combustion conditions to ensure that the fuel is fully burned.
Intake air secondary, disturb fuel gas in the furnace, to ensure the fuel fired totally. The independent secondary draft fan make it easy to control and adjust the wind and wind pressure.
The spreader feeds evenly to prevent tempering.
Low NOx emissions
Graded air supply and special furnace arch structure make the NOx emissions down to 100mg/m³.
We have a numerical simulations of different biomasses, we find the thermal efficiency is more than 90%.
Get Price And Support
Fill in the following information, we will contact you in the shortest time ( * Denotes a required field ).